Gate Parts & Welding in Palms, CA | ASAP Gate Repair Santa Monica

Gate Parts & Welding in Palms - Fabricated to Fit, Priced Per Job

Hinges, wheels, tracks and steelwork made to fit your gate rather than forced from a generic kit. Measured, fabricated and fitted, with the price agreed before we cut anything.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Up to 18
Years Technician Experience
238+
5-Star Reviews
Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Gate Parts & Welding in Palms, CA

Palms sits in one of the most gate-dense pockets of the entire Westside – block after block of mid-century apartment complexes, each guarding its carport with an original wrought-iron entry gate that’s been swinging (or barely swinging) since the Eisenhower administration. If your gate is frozen, sagging, or simply done, our team reaches most Palms addresses within two hours of your call. The crew at ASAP Gate Repair Santa Monica have been handling exactly this kind of work across the 90034 corridor for nearly two decades. Call us now at +1 (888) 697-8791.

Sliding gate opener base with exposed wires and tools. in Palms, CA

Why ASAP Gate Repair Santa Monica Is Palms’s Preferred Gate Parts & Welding Company

We know the building stock here intimately: the pivot-point failures on 1960s ornamental iron swing gates, the corroded post bases on garden-court complexes, the automation retrofits that property managers near the Culver City tech-entertainment corridor are now scrambling to complete.

With 238 reviews averaging 4.9 out of 5 stars, our reputation isn’t built on a handful of happy customers – it’s built on consistent work across hundreds of properties, many of them multi-family buildings exactly like the ones that line the streets of Palms. Palms customers specifically mention our punctuality, transparent pricing, and the fact that we don’t disappear after the first visit. We stand behind every weld and every replaced component.

Because our primary shop is in Santa Monica, Palms sits squarely within our fastest response zone – typically 60 to 90 minutes during regular hours, and same-day for most non-emergency calls. That matters when a frozen carport gate is blocking a dozen tenants from getting to work.

Our Gate Parts & Welding Services in Palms

Hinge Replacement in Palms

Sitting 3–5 miles inland from Venice and Santa Monica, Palms receives consistent marine-layer salt air that attacks iron hardware at a rate most inland neighborhoods never experience. Hinges on gates installed in the 1960s and 1970s don’t just wear out – they oxidize from the inside of the pivot barrel outward, until the gate drops a full inch on its swing arc and starts dragging concrete. We stock heavy-gauge hinge replacement kits rated for gates up to 800 pounds, which is exactly what you need when you’re replacing the entry point for an entire carport-level complex. A typical hinge replacement in Palms runs $180–$340 per hinge, depending on gate weight and whether the mounting post needs re-tapping.

Post Replacement in Palms

Post failure in Palms almost always starts at the base – marine air wicks into any concrete crack, and a steel post set in 1965 without adequate sealing will be rusted through at grade level before the rest of the gate shows a single blemish. We’ve replaced posts on complexes throughout the Fox Hills and Culver Garden areas where the original installation was perfectly fine in every other respect; the base simply gave out. Post replacement in Palms typically runs $420–$850, which includes excavation, new galvanized or powder-coated steel post, concrete resetting, and alignment to the existing gate panel.

Rail Repair in Palms

Slide gates on the larger dingbat complexes in Palms depend on a bottom rail that tracks through a concrete channel – and those channels collect gravel, bottle caps, and decades of debris that eventually deform or crack the rail itself. We straighten bent sections, replace cracked rails, and re-align the entire track so your operator motor – whether it’s a LiftMaster, FAAC, or Viking unit – isn’t fighting a warped surface every time it cycles. Rail repair in Palms generally falls in the $260–$600 range for standard residential slide gates, with larger commercial-gauge rails running higher.

Custom Welding in Palms

Not every repair problem has an off-the-shelf solution, especially on the ornamental ironwork that defines Palms’s older multi-family buildings. We can match existing scrollwork profiles closely enough that the repair is invisible from the street – which matters to property managers who care about curb appeal on blocks where every building is competing for the same tenant pool attracted by the nearby Culver City studios.

Welder performing gate parts and welding in Palms, CA

Trusted Brands We Service in Palms

Our Palms service vehicles carry parts for the brands most commonly found on Westside properties: LiftMaster and Linear operators on residential slide gates, FAAC and BFT swing-gate systems on newer automation retrofits, Viking and Elite commercial operators on the larger multi-family complexes, and Ghost Controls on single-family driveway installs in the bungalow pockets near Mar Vista. We also service DoorKing access control systems and Ramset anchoring hardware. Stocking locally means we’re not waiting on a parts shipment from a distant warehouse – most Palms jobs are completed in a single visit.

Common Gate Parts & Welding Problems We See in Palms Homes

  • Marine-rust pivot failure on 1960s ornamental iron swing gates: The consistent salt air rolling in off the coast accelerates oxidation inside hinge barrels and at post-mount welds. On blocks like Cattaraugus Ave and Mentone Ave, we routinely service four or five adjacent dingbat complexes in a single afternoon – every one with the same frozen pivot problem from decades of marine rust.
  • Corroded bottom rollers on carport-level slide gates: Rubber-tired and nylon rollers degrade faster on the Westside because of UV intensity and salt-air exposure. When the roller fails, the gate drops onto the concrete track and the operator motor burns out trying to move it – a two-part repair that’s easily avoided with a scheduled roller inspection.
  • First-time automation retrofits on buildings that were never wired for openers: The wave of landlord upgrades near the Culver City tech-entertainment corridor – Amazon Studios, Apple TV+, Sony Pictures are all pulling high-earning tenants into Palms – is pushing property managers to automate gates that have been manually operated. That means running conduit, setting operator posts, and sometimes rebuilding the gate frame to handle motor torque it was never designed for.
  • Latch and lock failure on shared pedestrian gates: Multi-tenant buildings mean high cycle counts – a pedestrian security gate on a 20-unit complex might open and close 60 or 80 times a day. Latches and locks on these gates fail far faster than on single-family driveways, and when they do, the property manager has a building-wide security gap, not just an inconvenience for one homeowner.

Pricing for Gate Parts & Welding in Palms, CA

Here’s what Palms customers actually pay for our most common services. A hinge replacement runs $180–$340 per hinge. Post replacement is typically $420–$850 depending on post diameter and concrete work required. Rail repair falls between $260–$600 for standard residential slide gates. Custom welding for ornamental repairs starts around $150 for a single picket weld and scales to $600–$1,400 for frame fabrication. Roller replacement (a set of four) runs $140–$280. Latch and lock replacement is typically $95–$195. Multi-family and commercial properties may see volume pricing when multiple gates on the same complex are addressed in one visit. All estimates are free – call +1 (888) 697-8791 and we’ll give you a firm number before any work begins.

We Also Serve Cities Near Palms

Our Palms team also covers Culver City, Mar Vista, Venice, Sawtelle, and Santa Monica gate repairs, along with Westwood, Brentwood, and Pacific Palisades. If you manage properties across multiple Westside neighborhoods, we can schedule combined service visits to reduce your per-property cost and minimize tenant disruption.

Serving Palms, CA – Our Local Coverage Area

We’re serving the Palms area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.

FAQs – Gate Parts & Welding in Palms

Why Palms Chooses ASAP Gate Repair Santa Monica

We set the standard for gate parts & welding in Palms.

Rapid Response in Santa Monica

We prioritize same-day and next-day scheduling for Santa Monica service calls, minimizing the window during which a malfunctioning gate leaves your property unsecured or inaccessible.

On-Site Fabrication Capability

Many repairs that other contractors must outsource to a metal shop - custom brackets, replacement hinge plates, section patches - can be fabricated on-site by our welding technicians, reducing turnaround time significantly.

Fully Licensed & Insured

We carry comprehensive general liability and workers' compensation coverage, protecting your property and your household from any risk associated with the work performed on your premises.

What Palms Customers Say

Trusted by homeowners across Palms and surrounding areas.

★★★★★

"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."

Lisa Hayes
★★★★★

"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."

Carmen Rodriguez
★★★★★

"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."

Priya Rao

How It Works in Palms

Getting your gate parts & welding handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate parts & welding needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Palms - typically within 30–60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Ready for Gate Parts & Welding in Palms?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Palms.

(888) 697-8791

Request a Free Estimate in Palms

Tell us about your gate parts & welding needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - 24/7 Dispatch