Gate Installation in Westwood, CA
Drive along Gayley Avenue on a January morning after a heavy atmospheric-river storm and you’ll notice something most outsiders miss: the ornamental iron gates on the Mediterranean-style estates sitting slightly askew, their posts shifted just enough by saturated clay soil to jam the operators before the first commute. That’s not a rare sight in Westwood — it’s a seasonal pattern we’ve tracked across Beverly Glen, Brentwood Heights, and the hillside corridors for the better part of two decades. If you’re a Westwood homeowner searching for gate installation or replacement right now, you’ve found the team that already knows your neighborhood. Call us at +1 (888) 697-8791 — we’re typically on-site in Westwood within hours, not days.
Why ASAP Gate Repair Santa Monica Is Westwood’s Preferred Gate Installation Company
Arthur Pendleton has led our crew for over 18 years, and a meaningful share of that work has been right here in Westwood and the surrounding hillside and coastal neighborhoods. We’ve earned 238 verified reviews averaging 4.9 out of 5 stars — not from a single zip code, but from homeowners across 90025, 90095, and the Brentwood-adjacent corridors who’ve watched us handle everything from a quick operator swap to a full driveway gate build on a freshly cleared lot.
Westwood customers call us back because we show up prepared. We know that a Beverly Glen property almost certainly has a late-1980s or early-1990s Linear or Eagle-brand system that’s reached end-of-life, and we don’t waste your afternoon pretending a board repair will fix what needs full replacement. That kind of honest, specific local knowledge is what separates a real Westwood gate installer from a generic dispatch service.
Our response window to Westwood is typically same-day or next-morning for standard installs, and we offer emergency dispatch for gate failures that compromise your property’s security. Whether your address is near the Bruin Bear on the UCLA side of Westwood or tucked into a private lane off Mulholland in Beverly Glen, we know how to reach you and what to bring.
Our Gate Installation Services in Westwood
Driveway Gate Installation
The dominant housing stock in Westwood’s estate corridors — Spanish Colonial and Mediterranean homes built between the 1950s and 1980s — almost always features a wide, heavy driveway gate as the primary security perimeter. We install new driveway gates from the post footings up, setting concrete deep enough to resist the clay-soil heave that plagues Beverly Glen and Brentwood Heights every wet season. For post-fire rebuilds in the Pacific Palisades corridor, we also engineer every automated driveway gate to meet LAFD manual-release and fail-safe-open requirements so your certificate of occupancy isn’t delayed. A new automated driveway gate installation in Westwood typically runs $3,800–$9,500 depending on gate width, material, and operator type.
Pedestrian Gate Installation
Side-yard and garden pedestrian gates on Westwood properties take a beating from the marine layer that rolls in off the coast and sits over the neighborhood year-round — uncoated steel hardware pits and seizes faster here than it would even ten miles east toward Culver City. We install pedestrian gates using powder-coated or hot-dip galvanized hardware specifically chosen for this coastal-adjacent microclimate, so your latch and hinges don’t corrode into a single rust-welded unit by the following winter. Pedestrian gate installation in Westwood generally runs $900–$2,800 depending on height, material, and whether an access keypad or intercom is included.
Sliding Gate Installation
Sliding gates are a smart choice on Westwood lots where the driveway grade or tight setbacks make a swinging gate impractical — but they demand precise track and roller installation to survive the seasonal soil movement that shifts foundations here. We set the track with enough tolerance to accommodate Beverly Glen’s expansive clay, and we program operators like LiftMaster and FAAC with travel limits we know will need a seasonal re-check after the first major storm. A sliding gate installation in Westwood runs approximately $4,200–$10,000 for a complete system including operator, track, and access hardware.
Swing Gate Installation
Ornamental wrought-iron swing gates are the default choice on Mediterranean and Spanish Colonial properties throughout Westwood, and we treat them accordingly — no off-the-shelf hinge kits, no undersized post flanges. We rebuild hinge assemblies and re-plumb posts to correct the out-of-plumb lean that accumulates over years of clay-soil movement, and we pair them with commercial-grade operators from BFT, Viking, or Elite that are rated for the gate’s actual weight, not just a nominal size category. Single swing gate installation in Westwood starts at $2,600 and double swing gate systems run $4,500–$11,000 depending on gate weight and operator selection.
Trusted Brands We Service in Westwood
We stock parts and operators for the brands Westwood homeowners actually have or want: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Ramset. Because we’re based in Santa Monica and run calls through Westwood daily, we’re not waiting on a parts shipment from a distant warehouse — we carry the most common boards, motor kits, and control hardware in our service vehicles. That means most Westwood installs move from permit-ready to fully operational without a multi-day parts delay.
Common Gate Installation Problems We See in Westwood Homes
- End-of-life Linear and Eagle operators on 1980s–1990s retrofits: Hundreds of Westwood estate properties had gates automated during a single decade, and those systems are now 30–35 years old. Control boards are no longer manufactured, and motor windings have exceeded their rated cycle counts — a repair attempt usually costs nearly as much as a new operator, with no warranty to show for it.
- Clay-soil post heave jamming operators seasonally: Beverly Glen and Brentwood Heights sit on expansive hillside clay that swells measurably after atmospheric-river rainfall events. Gate posts shift out of plumb, binding sliding gate rollers and reversing swing-gate travel limits — we see a spike in these service calls every February and March without fail.
- Marine-layer corrosion on uncoated hardware: The persistent coastal humidity that gives Westwood its mild temperatures also eats through bare steel hinges, latch bolts, and motor housings faster than almost anywhere else in greater Los Angeles. Homeowners near the 90025 zip code’s western edge often find hardware that looks surface-fine but has corroded through internally within five to seven years of installation.
- Post-fire installation requirements in the Pacific Palisades rebuild corridor: New gate installations on lots that were cleared by the January 2025 wildfire must comply with LAFD fail-safe-open and Knox Box manual-release standards before a certificate of occupancy is issued. Homeowners who hire a general contractor unfamiliar with these gate-specific access requirements often face failed inspections and costly rework.
Pricing for Gate Installation in Westwood, CA
Westwood sits in a mid-to-upper market range for gate installation in greater Los Angeles, driven by the size and weight of gates on estate-class properties and the additional engineering required for hillside post footings. Here’s what you can expect:
- Pedestrian gate (manual): $900–$1,800
- Pedestrian gate (automated): $1,500–$2,800
- Single swing gate (automated): $2,600–$5,500
- Double swing gate (automated): $4,500–$11,000
- Sliding gate (automated): $4,200–$10,000
- Driveway gate (full install, automated): $3,800–$9,500
Factors that move the number higher include heavy ornamental wrought iron (versus aluminum), hillside post-footing depth requirements, post-fire LAFD compliance features, and intercom or camera integration. We offer free on-site estimates in Westwood with no obligation — call +1 (888) 697-8791 to schedule yours.
We Also Serve Cities Near Westwood
Our team runs gate installation calls throughout the wider Westside corridor. Beyond Westwood, we regularly serve homeowners in Brentwood, Santa Monica, Pacific Palisades, Mar Vista, Venice, Culver City, Sawtelle, and Palms. If your property sits just outside Westwood’s borders, there’s a strong chance we were on your block last week.
Serving Westwood, CA — Our Local Coverage Area
We’re based in the Westwood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Installation in Westwood
We can typically reach Westwood same-day or next-morning for a consultation or estimate, since we run daily routes through the 90025 corridor and surrounding neighborhoods. For emergency gate failures — a stuck gate that won’t close or a damaged operator after a storm — we offer priority dispatch that usually puts a technician on-site within a few hours. Call +1 (888) 697-8791 to confirm today’s availability.
Yes — our Westwood service area covers the full range of the neighborhood, from the flat residential blocks near UCLA and the 90025 zip code all the way into the hillside canyons of Beverly Glen and up toward Brentwood Heights. We’re familiar with the access challenges on narrow hillside driveways and bring the equipment needed for post-footing work on sloped lots. No part of Westwood is outside our coverage.
Emergency same-day service is available in Westwood for situations where a gate failure creates a security or access problem — a gate stuck open on a property perimeter, or a post-storm operator failure that leaves a driveway unlatched. We prioritize these calls because we understand that an unsecured gate on a Westwood estate isn’t a minor inconvenience. Standard new-install projects are typically scheduled within two to five business days.
Westwood installs generally run slightly higher than Culver City or Mar Vista because of the larger gate sizes common on estate properties and the additional footing work required on hillside lots in Beverly Glen and Brentwood Heights. A comparable sliding gate install that runs $3,800 in Culver City might run $4,500–$5,500 in Westwood if the post footing requires extra depth or the gate panel is heavier ornamental iron. We’ll give you a specific written estimate so there are no surprises.
We back every gate installation in Westwood with a 12-month labor warranty and pass through the full manufacturer warranty on operators and hardware — LiftMaster and FAAC residential operators, for example, carry a 3-year parts warranty from the factory. Given Westwood’s specific corrosion and soil-movement conditions, we also recommend a seasonal adjustment check-in during the first spring after installation, which we offer to our Westwood customers at no additional labor charge.
Written by the team at ASAP Gate Repair Santa Monica, serving Westwood since 2007.
